manualshive.com logo in svg

Epson AL-MX200 Series, User Manual, Page: 225 / 410

Share
Download
Epson AL-MX200 Series User Manual Download Page 225

5. Select 

Time Format

, and then press the 

 button.

6. Select the desired format, and then press the 

 button.

7. Press the 

 (

Back

) button several times until the LCD panel shows 

Select Function

.

Sending a Fax

You can fax data from your printer.

Loading a Source Document on the Automatic Document Feeder (ADF)

Important:

Do not load more than 50 sheets on the ADF or allow more than 50 sheets to be fed to the document
output tray. The document output tray should be emptied before it holds more than 50 sheets or your
source documents may be damaged.

Note:

❏

To ensure the best scan quality, especially for gray scale images, use the document glass instead of the
ADF.

❏

You cannot load the following documents on the ADF. Be sure to place them on the document glass.

Curled documents

Pre-punched paper

Lightweight documents

Folded, creased or torn documents

Cut and paste documents

Carbon paper

AL-MX200 Series     User’s Guide

Faxing     

225

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Reviews:

No comments