Cannot Eject Paper Alternately in Portrait and Landscape Orientation
Paper loading or paper setting is wrong.
Solutions
To eject paper alternately, the printer prints on paper fed alternately from two paper sources. Therefore,
this feature is only available for A4 paper that can be loaded in horizontal and landscape orientations.
Select the paper size and direction on the control panel, and then select the setting for ejecting alternately
in the printer driver.
&
“Ejecting Paper in Portrait or Landscape Alternately” on page 34
Cannot Operate the Printer as Expected
The Printer Does Not Turn On or Off
Power Does Not Turn On
The following causes can be considered.
The power cord is not plugged in properly to the electrical outlet.
Solutions
Make sure the power cord is securely plugged in.
The
P
button was not pressed for long enough.
Solutions
Hold down the
P
button for longer than five seconds.
Power Does Not Turn Off
The
P
button was not pressed for long enough.
Solutions
Hold down the
P
button for a little longer. If you still cannot turn off the printer, unplug the power cord.
Power Turns Off Automatically
Power Off If Disconnected feature is enabled.
Solutions
Select
Settings
>
General Settings
>
Basic Settings
, and then disable the
Power Off If Disconnected
setting.
Note:
This feature may not be available depending on your region.
>
>
Cannot Operate the Printer as Expected
120