Epson AcuLaser CX37DNF Guide User Manual Download Page 50

Page: 50 / 86

Note:

❏

If the handset was picked up, return it to its cradle after reception is finished.

❏

FAX TX

ADMIN. MANAGEMENT

PASSWORD SETTING

FULL FUNC. NO.

has been restricted,

type in the number specified for

FULL FUNC. NO.

after pressing the

Start

key.

Forwarding Received Faxes

With forwarding, the received document is sent to the destination specified with this machine.

A fax number or e-mail address can be specified as the forwarding destination.

Note:

For details on specifying the forwarding destination, refer to “Specifying Forwarding Settings” on
page 21.

Printing Received Faxes

Printable Area

a = 4.0 mm

* Printable Area

The printable area on all media sizes is up to 4.0 mm (0.157") from the edges of the media.

Note:

The printable area of received faxes differs depending on the sender’s scanning area.

Epson AcuLaser CX37DNF Facsimile User’s Guide

Receiving Faxes

Summary of Contents for AcuLaser CX37DNF Guide























































































Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands

Epson AcuLaser CX37DNF Guide, User Manual

Search results

Summary of Contents for AcuLaser CX37DNF Guide

Reviews:

Related manuals for AcuLaser CX37DNF Guide

Brands by name

Popular brands