HEADER
Settings
OFF /
ON
Select whether or not to print transmission source information (date/time
of transmission, sender's name, sender's fax number, session number and
page number) for the machine in the transmitted document.
Note:
If
PTT SETTING
in the
USER SETTING
menu is set to
U.S.A
or
KOREA
, this
setting cannot be changed.
FAX RX OPERATION Menu
Note:
Manufacturer's default settings appear in bold.
MEMORY RX MODE
Settings
OFF
/ ON
Select whether to allow (ON) memory reception or not (OFF). Select
ON
not
to print when receiving confidential faxes or when no one is around, for
example, at night. The received documents can be stored in memory and
printed at a specified time or when memory reception is turned off (this
function is set to
OFF
).
A password can be set to specify the starting time or ending time of mem-
ory reception, or to cancel the function. The set starting time and ending
time are valid every day until memory reception is turned off.
For details on specifying settings, refer to “Setting Up the Memory RX
Mode” on page 20.
NO. of RINGS
Settings
1-16 (Default: Depends on PTT SETTING)
Enter the number of rings (between 1 and 16) until the machine automat-
ically begins receiving the fax when an external telephone is connected.
REDUCTION RX
Settings
OFF /
ON
/ CUT
Select whether documents longer than the current paper size are printed
reduced, split, or discarded.
❏
ON
: The document is printed at a reduced size.
❏
OFF
: The document is printed at full size and split onto multiple pages.
❏
CUT
: The document is printed, but any part that does not fit within the
page is erased.
For details on the relationship between the length of the received docu-
ment and the document that is actually printed, refer to “Printing Received
Faxes” on page 50.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Control Panel and Configuration Menu
16
