manualshive.com logo in svg

Epson aculaser cx37 series, User Manual

The Epson AcuLaser CX37 Series is a versatile and high-performance laser printer, designed to meet the printing needs of small businesses. With its user-friendly interface and superior quality outputs, this printer guarantees efficient operation. Easily set up your printer with the comprehensive Setup Manual available for free download on manualshive.com.

Share
Download
background image

Chapter 8

Replacing Consumables and Maintenance Parts

Note:

❏

Failure to follow instructions as outlined in this manual could result in voiding your warranty.

❏

If an error message (

REPLACE TONER

, 

Fuser Unit Life

, etc.) appears, print out the configuration

page, and then check the status of the other consumables. For details on the error messages, refer to
“Error Messages” on page 231. For details on printing the configuration page, refer to “Printing a
Configuration Page” on page 202.

About Toner Cartridges

Your printer uses four toner cartridges: black, yellow, magenta, and cyan. Handle the toner cartridges
carefully to avoid spilling toner inside the printer or on yourself.

Note:

❏

When replacing the toner cartridges, install only new cartridges. If a used toner cartridge is installed,
the amount of remaining toner may not appear correctly.

❏

Do not open the toner cartridge unnecessarily. If toner is spilled, avoid inhaling it or allowing it to
come in contact with your skin.

❏

If toner gets on your hands or clothes, immediately wash them with soap and water.

❏

If toner was inhaled, move to an area with fresh air, and gargle thoroughly with a large quantity of
water. If conditions such as coughing appear, seek professional medical attention.

❏

If toner gets in your eyes, immediately flush them with water for at least 15 minutes. If any irritation
persists, seek professional medical attention.

❏

If toner gets in your mouth, thoroughly rinse it, and then drink 1 to 2 cups of water. If necessary, seek
professional medical attention.

❏

Store toner cartridges out of the reach of children.

Note:

The use of non-genuine toner cartridges may result in unstable performance. In addition, any damage
caused by the use of non-genuine toner cartridges is not covered by the warranty, even if it occurs during
the warranty period. (Although damage is not certain to result from using non-genuine toner cartridges,
we strongly recommend that you use genuine toner cartridges.)

Epson AcuLaser CX37 Series     Printer/Copier/Scanner User’s Guide

Replacing Consumables and Maintenance Parts     

167

Summary of Contents for aculaser cx37 series






































































































































































































































































Reviews:

No comments

Related manuals for aculaser cx37 series

Samsung SCX-4300 - SCX 4300 B/W Laser User Manual preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 97
Samsung SCX 4828FN - Laser Multi-Function Printer Manual Del Usuario preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 151
Samsung SCX 4725FN - B/W Laser - All-in-One Manual Del Usuario preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 120
Samsung SCX 4500 - B/W Laser - All-in-One Manual Del Usuario preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 97
Samsung SCX 4200 - B/W Laser - All-in-One Manual Del Usuario preview
SCX 4200 - B/W Laser - All-in-One
Brand: Samsung Pages: 95
Samsung SCX 4500 - B/W Laser - All-in-One User Manual preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 172
Samsung ProXpress M337x User Manual preview
ProXpress M337x
Brand: Samsung Pages: 56
Samsung PROXPRESS M332 SERIES User Manual preview
PROXPRESS M332 SERIES
Brand: Samsung Pages: 50
Samsung ML-2240 - 23 Ppm Mono Laser Printer Manual Del Usuario preview
ML-2240 - 23 Ppm Mono Laser Printer
Brand: Samsung Pages: 82
Samsung ML-2150 Servicing Precautions preview
ML-2150
Brand: Samsung Pages: 8
Samsung ML-1610 - B/W Laser Printer User Manual preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 134
Samsung ML-1610 - B/W Laser Printer Manual Del Usuario preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 112
Samsung ML-1210 Manual Del Usuario preview
ML-1210
Brand: Samsung Pages: 128
Samsung ML ML-4551N Manual Del Usuario preview
ML ML-4551N
Brand: Samsung Pages: 152
Samsung ML 3471ND - B/W Laser Printer User Manual preview
ML 3471ND - B/W Laser Printer
Brand: Samsung Pages: 207
Samsung ML 2150 - B/W Laser Printer Manual Del Usuario preview
ML 2150 - B/W Laser Printer
Brand: Samsung Pages: 237
Samsung ML 3471ND - B/W Laser Printer Manual Del Usuario preview
ML 3471ND - B/W Laser Printer
Brand: Samsung Pages: 103
Samsung ML 2150 - B/W Laser Printer User Manual preview
ML 2150 - B/W Laser Printer
Brand: Samsung Pages: 217

Brands by name

Popular brands

Load more brands