Epson Aculaser CX21N Series, User Manual

Page: 216 / 401

Faxing (Fax Model Only) 216
Note:
To use this function, your product needs to have an attached phone, and
Incoming Mode
in
Reception Settings
needs to be set to
Auto switching
. For details, see "Making Changes to Fax
Settings" on page 216.
1. Answer the incoming call using the attached phone.
2. Press the
x
B&W Start or
x
Color Start button after confirming the fax tone.
The received data are printed by page as they are received.
Receiving faxes using fax polling
This function is used to get the information stored in the other party’s fax machine to your
product.
1. Make sure that the product is in Fax mode. If not, press the Fax button to enter the
Fax mode.
2. Enter the other party’s fax number using the numeric keypad.
3. Press the
u
Up or
d
Down button several times until
Polling Rcptn
appears, then
press the
l
Left or
r
Right button to select
On
.
4. Press the
x
B&W Start or
x
Color Start button to start the transmission.
Making Changes to Fax Settings
Selecting the appropriate settings
You can change the following settings for transmitting or receiving faxes with the
appropriate settings.
Document size
You can specify the document size from A4, Letter, and Legal.
Note:
Legal size documents are available only with the Auto Document Feeder.
1. Make sure that the product is in Fax mode. If not, press the Fax button to enter the
Fax mode.