Epson Aculaser CX21N Series User Manual Download Page 121

Page: 121 / 401

Using the PostScript Printer Driver

121

❏

On the

Device Settings

sheet of the printer’s Properties dialog box, make sure that

SEND CTRL-D Before Each Job

and

SEND CTRL-D After Each Job

are set to

❏

TBCP (Tagged binary communications protocol) cannot be used as the

Output

Protocol

setting.

❏

On the

Job Settings

sheet of the printer’s Properties dialog box, make sure to clear the

Job Management On

check box.

Using the PostScript Printer Driver with Macintosh

Installing the PostScript printer driver

Follow the steps below to install the PostScript printer driver.

Note:

Make sure that no applications are running on your Macintosh before installing the printer driver.

For Mac OS X users

Note:

Make sure that

Printer Setup Utility

(for Mac OS X 10.3 and 10.4) or

Print Center

(for Mac OS X

10.2) is not open.

1. Insert the printer software CD-ROM into your CD-ROM drive.

2. Double-click the CD-ROM icon.

3. Double-click

Mac OS X

, then double-click

PS Installer

Note:

For Mac OS X 10.2, if the Authenticate window appears, enter the user name and password for
an administrator.

4. The Install EPSON PostScript Software screen appears, click

Continue

, then follow

the on-screen instructions.

5. Easy Install is displayed on the screen. Click Install.

Note:

For Mac OS X 10.3 and 10.4, if the Authenticate window appears, enter the user name and
password for an administrator.

6. When installation is done, click

Close

Summary of Contents for Aculaser CX21N Series


















































































































































































































































































































































































































Search results

Summary of Contents for Aculaser CX21N Series

Reviews:

Related manuals for Aculaser CX21N Series

Brands by name

Popular brands

Epson Aculaser CX21N Series, User Manual

Search results

Summary of Contents for Aculaser CX21N Series

Reviews:

Related manuals for Aculaser CX21N Series

Brands by name

Popular brands