Replacing a Toner Cartridge
Note:
Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a
soft, dry cloth.
If
MACHINE SETTING
/
TONER OUT STOP
in the UTILITY menu is set to
ON
, the message
TONER OUT
/
CHANGE X TONER
(where “X” indicates the color of the toner) appears when the toner cartridge is
nearly empty. Follow the steps below to replace the toner cartridge.
Note:
If
MACHINE SETTING
/
TONER OUT STOP
in the UTILITY menu is set to
OFF
, printing can continue even
after the message “
Toner Out X
” has appeared; however, the printing quality cannot be guaranteed. If
printing is continued and the toner becomes empty, the message “
TONER LIFE END
/
CHANGE X TONER
”
appears and printing stops. For details on the setting, refer to “MACHINE SETTING Menu” on page
32.
1. Check the message window to see which color toner cartridge needs replacing.
Note:
If the machine detects that a toner cartridge is empty (
TONER OUT
or
TONER LIFE END
appears), the
empty toner cartridge is automatically moved so that it can be replaced.
If you wish to change the toner cartridge, use ether operation described below to switch the printer
to REPLACE MODE.
2. With the main screen displayed, press the
l
key to display the PRINTER MODE screen.
3. Press the
d
key to select
T/C CHANGE
and then press the
Select
key.
4. Press the
Select
key to select
REPLACE MODE
.
5. Press the
u
or
d
key to select the color for the toner cartridge to be replaced, and then press the
Select
key.
The toner cartridges rotate within the machine to move the toner cartridge of the selected color to
a position where it can be replaced.
Note:
To exit REPLACE MODE, press the
Stop/Reset
key.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Replacing Consumables
119