Epson AcuLaser CX11 Series, Service Manual

Page: 136 / 668

EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING MFP Maintenance Mode 138
3.3.2.1 Memory Clear
Address memory used for the speed dials and other information memory concerning fax transmission/reception can be cleared at once. Six items are provided and memory areas to
be cleared are preset by the items as shown in
Table 3-8 .
When you select “Memory Clear” and press [Right], the Memory Clear menu screen as shown below will be displayed. Select a target item and press [Right] to clear the memory
areas. Be sure to check which memory areas will be cleared by the selected item with reference to
Table 3-8 before executing the operation.
Note O : Cleared
X : Cannot be cleared
†
Example of Memory Clear Screen
Note : “OK” is displayed when the process is completed normally, “NG” is displayed with numbers that indicate the error when failed to complete the process. Once the process is over, press [Stop]
to return to the previous screen (Memory Clear menu screen).
Table 3-8. Memory Areas to be Cleared by Item in Memory Clear
Item
(Memory Area Category)
Panel Indication
Speed Dial
Group Dial
One Touch Dial
Personal Number/Name
Communication Report
Memorized Unfinished
Sending Job Info
Print Data Info
Receiving Job Info
System Counter
System Error
History
Internal Error
History
System Parameter
ALL All area O O X O O O
Fax user User area O X X X X O
Fax system System area X O X O O O
Fax system counter Counter area X X O X X X
Fax error history Error area X X X O O X
Fax system parameter Parameter area X X X X X O
Processing “All area” Clear Clearing “User area”
Completed
When Error Occurs (Failed
to clear “System area”)
manuals4you.com manuals4you.com