Epson AcuLaser CX11 Series, Service Manual

Page: 135 / 668

EPSON AcuLaser CX11/CX11F Revision B
TROUBLESHOOTING MFP Maintenance Mode 137
3.3.2 Fax Maintenance
Fax Maintenance is provided for controlling memory including destination addresses
and for checking if there are any problems with the fax unit. Procedures to access the
items of the Fax Maintenance are shown below.
PROCEDURES TO ACCESS THE FAX MAINTENANCE
1. Hold down the [Color Start], [Up], [Down], and [Right] buttons and turn the
printer on. Select (highlight) “Fax Maintenance” and press [Right] to enter the Fax
Maintenance menu screen.
2. Select (Highlight) a target item in the Fax Maintenance menu, and press [Right] to
enter the menu screen of the selected item.
DETAILS ON FAX MAINTENANCE ITEMS
Details on each item in the Fax Maintenance menu are described in the following
sections.
„
Memory Clear : “3.3.2.1 Memory Clear” (p138)
„
Memory Check : “3.3.2.2 Memory Check ” (p139)
„
Parameter Check : “3.3.2.3 Parameter Check ” (p140)
„
Module Check : “3.3.2.4 Module Check ” (p141)
„
Signal Check : “3.3.2.5 Signal Check ” (p142)
[MFP Maintenance Mode Initial Screen]
[Fax Maintenance Initial Screen]
C A U T I O N
Some of the functions provided in the Fax Maintenance menu
involve fax basic operation settings. Improper operation or setting
using the functions may cause fax malfunction.
Do not change the settings unless instructed to do so, or need for
doing it arises.
justmanuals.com justmanuals.com