Safety Instructions
3
R4C4960 Setup Guide
Rev. C
A5 size
SAFETY.FM
5/24/01
Pass 0
R
Proof Sign-off:
ABE S.Takahashi E.Otera_______
E. Otera
_______
ABE G. Kok
_______
❏
Be sure not to scratch the surface of the drum. When you
remove the photoconductor unit from the printer, always set
the unit on a clean, smooth surface. Also, avoid touching the
drum, since oil from your skin can permanently damage its
surface and may affect print quality.
❏
To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
❏
Be sure to keep consumable components out of the reach of
children.
❏
Do not leave jammed paper inside the printer. This can cause
the printer to overheat.
Hinweis:
Die Geräteanschlußleitung muß den einshlägigen Normen genügen.
Es muß eine dreiadrige Leitung verwendet werden.
Die Anshlußleitung darf nicht leichter als H05VV-F order H05VVH2-
F sein.
Maschinenlärminformations-Verordnung-3. GSGV, 18. 01. 1991: Der
arbeitsplatzbezogene schalldruckpegel beträgt 70 dB (A) oder weniger
gemäß ISO 7779.
Important Safety Instructions
Read all of the following instructions before operating your
printer:
❏
Follow all warnings and instructions marked on the printer.
❏
Unplug the printer from the electrical outlet before cleaning.
Use a damp cloth for cleaning and do not use liquid or aerosol
cleaners.
❏
Do not use the printer near water.
