Epson AcuLaser C8500, Service Manual

Page: 241 / 570

EPSON AcuLaser C8500 Revision C
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures 3-89
3.2.13.1 EXIT TRAY ASSY (PL10.1.10) Removal
1. Bend the rear hinge of the EXIT TRAY ASSY inward, remove the boss
from the FUSER TRAY, remove the front hinge, and remove the EXIT
TRAY ASSY.
Figure 3-99. EXIT TRAY ASSY Removal
3.2.13.2 EXIT UPPER ASSY (PL10.1.2) Removal
1. Open the EXIT UPPER ASSY.
NOTE: Be careful not to damage the hinges of the EXIT UPPER ASSY when
performing the following.
2. Bend the front hinges of the EXIT UPPER ASSY inward, remove the boss
from the front of the EXIT LOWER ASSY, and remove the hinge of the
EXIT UPPER ASSY. Then remove the rear hinge and remove the EXIT
UPPER ASSY.
Figure 3-100. EXIT UPPER ASSY Removal
C H E C K
P O I N T
Mount the EXIT TRAY ASSY so that the spring of the front
hinge touches the outside of the FUSER TRAY ASSY.