Epson AcuLaser C4000 Owner'S Manual Download Page 314

Page: 314 / 420

304

Troubleshooting

Warning:
Do not touch the fuser, which is marked

CAUTION HIGH

TEMPERATURE

, or the surrounding areas. If the printer has

been in use, the fuser and the surrounding areas may be very
hot.

3. Close cover B.

When the paper jam is cleared completely and cover B is closed,
printing resumes from the page that jammed.

Jam ABC (cover A, paper cassettes and cover B)

When there are paper jams where paper feeds into the printer or
in the paper cassettes, and at the duplex unit, the LCD panel
displays the

Jam ABC

error message.

To clear the paper jam, first clear the jammed paper where paper
feeds, as described in “Jam AC (cover A and paper cassettes)” on
page 297. Then, clear the jammed paper at the duplex unit as
described in “Jam B (cover B)” on page 302.

Summary of Contents for AcuLaser C4000





































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4000

Reviews:

Related manuals for AcuLaser C4000

Brands by name

Popular brands

Epson AcuLaser C4000, Owner'S Manual

Search results

Summary of Contents for AcuLaser C4000

Reviews:

Related manuals for AcuLaser C4000

Brands by name

Popular brands