Entering or changing passwords
To specify a User password, you must first specify a Supervisor
password. Follow these steps to enter or change a password:
1 . S e l e c t S e t S u p e r v i s o r P a s s w o r d a n d p r e s s
E n t e r .
2.
You see a Set Supervisor Password window. Type a
password of up to seven characters and press
Enter.
3.
Type the same password a second time and press
Enter. You
see a message that your changes have been saved.
4 . P r e s s t h e s p a c e b a r . T h e S u p e r v i s o r P a s s w o r d o p t i o n
now displays Enabled.
To set a User password, select the Set User Password
option as you follow the steps above.
Deleting passwords
To delete your passwords, follow these steps:
1 . S e t t h e P a s s w o r d o n b o o t o p t i o n t o D i s a b l e d .
2.
Delete the User password by pressing
Enter
for both the
password field and the confirmation field. Don’t type any
characters in these fields.
3.
Then delete the Supervisor password the same way.
Note
If you set both a User and Supervisor password, you must
delete the User password before you can access the
Supervisor password option.
If you forget your password, see “Password Problems” in
Chapter 7.
2-14
Running SETUP and Installing Drivers
