Printing
Problem
Solution
The print position is
not what you
expected.
Printing starts too
high or too low on the
page
One line of printing
has taken up two lines.
The loading position may be incorrect.
Use micro-adjustment to adjust the
loading position. See Chapter 3. If the
problem persists, check the top margin
set by your application software and
adjust it.
Auto line feed may be on. Turn off DIP
switch 2-4.
The margin setting may not be correct.
Use your application program to change
the margin.
In BASIC, enter either of the following
statements:
WIDTH LPRINT 255
“LPT1” 255
If the printer still does not print properly,
set the right margin to the maximum
setting using ESC Q. See Chapter 9.
Troubleshooting
7-11
