Epson ActionPrinter 3250, Network Manual

Page: 65 / 133

6. Follow the on-screen instructions to set up the printer. See “Installing a printer driver” on page
65 if necessary.
Microsoft Network Shared printing
1. Click Start , point to Settings , and then select Printers .
2. Double-click Add Printer to start the Add Printer wizard, and then click Next .
3. Select the Network printer radio button and then click Next .
4. Select the Type the printer name, or click Next to browse for a printer radio button.
5. Enter the following in the Name box or click Next to browse for a printer.
\\NetBIOS name of network interface\Device name of network interface
6. Follow the on-screen instructions to set up the printer. See “Installing a printer driver” on page
65 if necessary.
Installing a printer driver
1. Insert the Software CD-ROM shipped with the printer.
2. Close the Software Installation screen if it appears.
3. Click the Have Disk button. The Install From Disk dialog box appears.
4. Click Browse .
5. Select the CD-ROM drive for Drives, and double-click the WINVISTA_XP_2K , WINXP_2K , or
WIN2000 folder. Click Open .
6. Click OK in the Install From Disk dialog box.
7. Select the model name of the printer, and then click Next .
Note:
If the Add Printer wizard prompts you to select either Keep existing driver or Replace existing
driver , be sure to select the Replace existing driver radio button.
8. Click Finish and follow the on-screen instructions to complete the setup.
EPSON Network Guide
How To 65