Epson ActionPrinter 2250 User Manual Download Page 46

Page: 46 / 106

Operating the Control Panel

You can control basic printer operations - line feeding, form

feeding, paper loading and ejecting, and font selection -with the

buttons on the control panel. The indicator lights show the printer

status.

Lights

The panel lights provide information on certain printer conditions

and settings.

READY

light

The READY

light is on when the printer is ready to receive data from

the computer. It flashes briefly each time you turn on the printer.

The READY

light also flashes under the following conditions:

The printer is out of paper.

The printer is in the tear-off mode (when the push tractor is

installed.)

When an error occurs, the

READY

light goes off.

3-2

Using the Printer

Summary of Contents for ActionPrinter 2250











































































































Search results

Summary of Contents for ActionPrinter 2250

Reviews:

Related manuals for ActionPrinter 2250

Brands by name

Popular brands

Epson ActionPrinter 2250, User Manual

Search results

Summary of Contents for ActionPrinter 2250

Reviews:

Related manuals for ActionPrinter 2250

Brands by name

Popular brands