EPSON ActionPC/ActionTower 7000 series (including ActionTower 8400)
Power Supply
Type
200 Watt, UL/TUV/CSA listed, fan-cooled
Input ranges
100-120 VAC or 200-240 VAC;
switch-selectable
Maximum
+5 VDC at 20 Amps, -5 VDC at 0.5 Amp
output
+12 VDC at 8 Amps, -12 VDC at 0.5 Amp
Frequency
50 to 60Hz
Cables
Two to main system board, five to mass
storage devices; for more
than
five
devices, Y cables can be installed on the
existing cables
Option slot power limits
output voltage (VDC) +5 volts
volts
+12 volts
volts
For
all slots
12 Amps
0.4 Amp
4.0 Amps
0.4 Amp
Environmental Requirements
Condition
Temperature
Operating range
41° to 90° F
Storage range
-4° to 140°F
Humidity
(non-condensing)
Altitude
(5° to 32° C)
(-20° to 60° C)
20% to 90%
10% to 90%
-330 to 9,900 ft
-330 to 39,600 ft
(-100 to 3,000 m)
(-100 to 12,000 m)
Jumper Settings
* Off for DX4 (3x); 2-3 for DX2 (2X)
Miscellaneous jumper settings
Jumper
number
JP4
JP5
Jumper
setting
1-2*
2-3
Off
Function
Selects 5V flash memory
Selects 12V flash memory
EPROM
I Enables PCI IDE controller
JP11
JP12
1-2
O n
o f f ’
1-2
l
Disables PCI IDE controller
Clears CMOS memory (resets SETUP values to
factory defaults)
Normal CMOS values
Enables on-board I/O controller
JP15
2-3
I 1-2*
Disables on-board I/O controller
Enables on-board VGA controller
2-3
* Default setting
Disables on-board VGA controller
Parallel port ECP mode DRQ jumper settings
Function
JP13
JP14
DRQ1 (DACK1)*
1-2
1-2
DRQ4 (DACK3)
2-3
2-3
* Default setting
10/30/95
ActionPC/ActionTower 7000 series
(including ActionTower 8400) - 3
