Epson ActionPC 5000, User Manual

Page: 84 / 176

Adjusting the tear-off position
If the perforation is not aligned with the tear-off edge, adjust
the tear-off position by following the steps below:
1. Make sure the paper is in the tear-off position and the
TEAR
OFF
light is on.
2.
While holding down the
ALT button,
press
the LOAD/EJECT
button to adjust the
tear-off position to a lower position on
the page or press the
LF/FF button to adjust the
tear-off
position to a higher position on the page. The printer
remembers the new tear-off position.
3. Tear off any printed pages.
4.
When you begin printing, the printer automatically feeds the
paper back to the loading position and begins printing.
(You can also manually feed the paper back to the loading
position by pressing the
LOAD/EJECT or TEAR OFF button.)
Note:
The printer has a minimum and maximum tear-off position. If
you try to advance the loading position beyond these limits, the
printer beeps and the paper stops moving.
When the paper
reaches
the factory-set tear-off position, the
printer beeps and paper feeding pauses briefly.
Use the
factory
setting as a reference point when adjusting the tear-off position.
Using the Printer 3-19