Installing the PCI IDE Drivers
PCI IDE drivers let you take advantage of the high-speed
performance available through your system’s IDE interfaces for
hard disk drives and other IDE devices.
The PCI IDE Drivers diskette contains drivers for these
programs:
MS-DOS
Windows 3.1
OS/2
®
versions 2.0 and higher (2.X)
Novell
®
NetWare versions 3.1 and higher (3.1X)
Novell NetWare versions 4.0 and higher (4.0X).
Note
Windows must be installed on your system before you
install the Windows drivers.
Before installing the drivers
Before you install the PCI IDE drivers, make sure you back up
your hard disk drive. Then use the installation program on the
PCI IDE Drivers diskette to install the drivers.
Note
Make sure you use the installation program to install the PCI
IDE drivers. If you simply copy the driver files, they won’t
work correctly.
2-18
Running SETUP and Installing Drivers
Summary of Contents for ActionPC 2600
