Epson 7800 - Stylus Pro Color Inkjet Printer, Printer Manual

Page: 157 / 176

6-157
Solving Problems | 157
Your print appears
blurry or smeared.
◗
Make sure the Media Type setting in the printer software is correct for the media
you’re printing on.
◗
If you’re printing on non-Epson media, you may need to adjust the paper thickness
setting, drying time, or color density. Use your printer software (page 88 for
Mac OS X or page 111 for Windows) to choose the correct setting. When you’re
done printing with a custom paper configuration, be sure to return the setting to
standard (
STD ).
◗
Your paper doesn’t meet the required specifications or wasn’t stored in a dry,
humidity-free environment. Load new paper.
◗
If you’re using cut sheet media, make sure the printable side is face up.
◗
Ink has leaked into the paper path. Wipe the paper path area of the printer with a
soft, clean cloth. See page 143 for cleaning instructions.
◗
Turn off High Speed in your Advanced settings.
◗
The platen gap setting is too narrow. Use the control panel to change the setting to
WIDE or WIDER . See page 69 for instructions.
◗
Run a nozzle check and cleaning cycle (see page 122).
The bottom edge of
your print is smeared.
◗
The paper is curled toward the printable side. Flatten the paper or curl it toward the
other side.
◗
Make sure the Media Type setting in your printer software is correct for the media
you’re printing on.
◗
If you’re printing on non-Epson media, you may need to adjust the paper thickness
setting or drying time. Use your printer software (page 88 for Mac OS X or
page 111 for Windows) to choose the correct setting. When you’re done printing
with a custom paper configuration, be sure to return the setting to standard (
STD ).
◗
If printing on thick paper, the platen gap setting may be incorrect. Use the control
panel to change the setting to
WIDE or WIDER; s ee page 69.
Problem Solution
7800-9800Guide.book Page 157 Monday, April 10, 2006 11:59 AM