3-88
88
|
Printing with Epson Drivers for Macintosh
Choosing Paper Configuration Options
Follow these instructions if you are using non-Epson media and you need to
fine-tune its performance.
1. Select
Paper Configuration
from the drop-down menu. You see this
screen:
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
•
Color Density
lets you control the ink saturation level.
•
Drying Time per Print Head Pass
lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
•
Paper Feed Adjustment
helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
•
Paper Thickness
helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
Note:
You may need to
change the Color Density
setting if your custom
color profile was created
to optimize D-max and
color gamut.
7800-9800Guide.book Page 88 Monday, April 10, 2006 11:59 AM
Summary of Contents for 7800 - Stylus Pro Color Inkjet Printer
Page 4: ...4 7800 9800Guide book Page 4 Monday April 10 2006 11 59 AM ...
Page 16: ...16 16 Introduction 7800 9800Guide book Page 16 Monday April 10 2006 11 59 AM ...
Page 54: ...1 54 54 Setting Up the Printer 7800 9800Guide book Page 54 Monday April 10 2006 11 59 AM ...
Page 176: ... 176 176 Index 7800 9800Guide book Page 176 Monday April 10 2006 11 59 AM ...
