Epson 6110i - PowerLite XGA LCD Projector, User Manual

Page: 43 / 130

Using the Remote Control
43
Replacing the Batteries
The remote control uses two AAA alkaline batteries. Follow these
steps when you need to replace them:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should click into place.)
caution
When replacing batteries,
take the following
precautions:
■
Replace the batteries as
soon as they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.
■
Do not expose batteries to
heat or flame.
■
Dispose of used batteries
according to local
regulations.
■
Remove the batteries if
you won’t be using the
projector for a long period of
time.