Epson PowerLite S4
6 - Epson PowerLite S4
6/06
To change the aspect ratio,
press the
Resize
button on
the remote control.
Turning Off the Picture and Sound
Press the
A/V Mute
button on the remote control to darken
your screen and turn off the sound. When you’re ready to
resume, press
A/V Mute
again.
Note:
You can make the blank screen blue, instead of black,
whenever you press the
A/V Mute
button by selecting it as the
background color in the
Extended > Display
menu.
You can also temporarily
stop the picture and sound
by closing the lens cover.
Freezing the Action
Press the
Freeze
button on the remote control to temporarily
freeze the action on the screen. This freezes any moving images
on the screen until you press the
Freeze
button again.
Like the A/V Mute feature, if you are projecting a video, the
video and audio continue while the projected image is paused.
Locking the Projector
You can lock the projector to prevent the image from being
accidentally changed once it’s adjusted, and to keep children
from using the projector without adult supervision.
1. Press the
Menu
button on the projector or remote control.
2. Use the menu navigation buttons to open the
Settings
menu, then select
Operation Lock
.
3. Turn the setting on to disable all the buttons on the
projector’s control panel, except for the
Power
button. To
operate the projector, you have to use the remote control.
4. Press
Menu
to exit the menu system.
Note:
You can also set a password to prevent unauthorized use of
the projector, or to allow the projector to be used for a selected
period of time before password entry is required. See the
User’s
Guide
for details.
Projector Status Lights
If your projector isn’t working correctly, first turn it off, wait for
the warning light to turn a steady orange, and unplug it. Then
plug the power cord back in and turn on the projector. If this
doesn’t solve the problem, check the lights on top of the
projector. They alert you to possible problems.
Resize
button
Light
Status
Action
P
off
Make sure the power cable is connected
securely at both ends.
P
orange
The projector is in standby mode. You can
unplug the projector or press the
P
Power
button to turn it on.
P
flashing green
The projector is warming up. The projected
image starts to appear after about 4 seconds.
P
green
The projector is operating normally.
P
flashing
orange
You’ve turned off the projector and it’s
cooling down. Wait until the light stops
flashing, then unplug it (or press the
P
Power
button to turn it back on).
flashing
orange
The lamp needs to be replaced soon. Make
sure you have a spare lamp handy.
P
Power
light is
red and
Lamp
light is flashing
red
The lamp needs to be replaced for projection
to continue. If you just replaced the lamp,
make sure the lamp cover is securely
attached.
P
Power
light is
flashing red
and
Temp
light is flashing
orange
The projector is overheating. Make sure the
air filter is clean; replace it if necessary.
P
Power
and
Temp
lights
are red
The projector is overheating. The lamp will
turn off automatically and projection will stop.
Make sure the air filter is clean; replace it if
necessary.
Power
light is
red and
Temp
light is flashing
red
There is an internal problem. Turn off the
projector and unplug it. Then contact Epson
for assistance.
Power light
Temperature light
Lamp light