Epson 2200 - Stylus Photo Color Inkjet Printer, Service Manual

Page: 21 / 258

EPSON Stylus PHOTO 2100/2200 Revision B
PRODUCTION DESCRIPTION Basic Specifications 21
3. At the setting of bottom margin to 0mm
Since printing is restricted in the bottom off-range area (e) after the
distance f from the paper bottom, only a total of 14 nozzles, #66 to
#79, are used per nozzle line to perform printing.
Figure 1-9. Head Movable Area for 0mm Bottom Margin
!
Printing area (Roll paper)
"
Printing area
The range made of the printable area A or printing areas A + C shown in
Figure 1-10. Note that printing in the range of printing areas A + C is limited
to the paper width 89, 100, 127, 210 or 329mm or to 4.5 inches.
"
Head movable area
Set the head movable area (area where the head may come out of the printing
range) relative to the printing area in the paper feeding direction. This area is
as shown in Figure 1-10 (roll paper).
Figure 1-10. Printing Area Diagram (Roll Paper)