manualshive.com logo in svg

Epson 2200 - Stylus Photo Color Inkjet Printer, Service Manual

The Epson 2200 - Stylus Photo Color Inkjet Printer is a high-quality printing solution designed for professional photographers and avid enthusiasts. To make the most of this versatile printer, a comprehensive User Manual is essential. Easily download the free manual from manualshive.com to explore all the features and unleash your creativity effortlessly.

Share
Download
background image

EPSON Stylus PHOTO 2100/2200

Revision B

ADJUSTMENT

Adjustment Items and Overview

188

5.1  Adjustment Items and Overview

This chapter describes adjustments to be made after the disassembly/reassembly of this product.

5.1.1  Servicing Adjustment Item List

The adjustment items of this product are as follows. For details of the adjustment items, refer to the detailed procedures and sketches of the adjustment items.

Table 5-1.  Servicing Adjustment Items

Function Item

Purpose

Method Outline

Tool

Used 

Media

Ma

in adj

u

st

me

nt it

em

s

Destination data 
input

At the time of Main board replacement, this 
adjustment is made to write the board common 
information on a destination basis.

Select and execute this function in the exclusive servicing program to save 
the following data into the EEPROM.
Market ID, CSIC printer ID, D4 setting (USB, parallel), CSIC ink name, 
printout position adjustment fixed value
Supplement: Write of Ink Flags 1, 2 is not planned.
(Since the initial filling flags are not set in general repair.)

Exclusive servicing 
program

Non-target

Head ID input

At the time of head replacement, this adjustment is 
made to correct head manufacturing variations and 
eliminate the individual differences of print quality.

Enter the ID of the head QR code label applied to the Printhead into the 
exclusive servicing program to save it to the EEPROM on the Main board. 
(Supplement: Read the QR code label from left to right on the top row and 
from top to bottom in due order.)

Exclusive servicing 
program

Non-target

CR variation 
correction

When the Main board, CR motor or PSB/PSE 
board is changed individually, this adjustment is 
made to write the maximum correction value to 
prevent the occurrence of damage to the motor at 
the time of CR motor heat generation.
However, when the CR shaft is changed together 
with the above part, this adjustment is made to 
measure the manufacturing variations of the CR 
motor and PSB/PSE board, utilize the motor 
capability to the maximum for motor heat 
generation control, and prevent the motor from 
being damaged by CR motor heat generation.

Select/execute this function in the exclusive servicing program.

When you turn on the check boxes of the corresponding parts changed 
during repair, the program automatically determines whether to enter the 
maximum value of CR variation correction or to measure CR variations, 
and performs either operation.

The correction value is saved to the specific EEPROM address on the 
Main board.

Exclusive servicing 
program

Non-target

PG adjustment

This adjustment is made to install the Front and 
Rear CR guide shafts in parallel to the print surface 
and to secure the predetermined clearance from the 
print surface in the PG 0 position.

Place the exclusive adjustment gauges (one set of left and right gauges) in 
the specified positions on the Paper guide, connect the Tester, adjustment 
gauges and Head grounding plate or Mechanical frame with Alligator clip 
cables, and check contact of the Head and adjustment gauges by Tester 
continuity. To make adjustment, vary the Adjust parallelism bush fixing 
positions of the printer CR main shaft/sub shaft.

• Exclusive servicing 

program

• Exclusive PG 

adjustment gauges

• Printer parallelism 

adjustment lever

Non-target

Summary of Contents for 2200 - Stylus Photo Color Inkjet Printer



































































































































































































































































Reviews:

No comments

Related manuals for 2200 - Stylus Photo Color Inkjet Printer

NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Brand: NEC Pages: 8
TallyGenicom 9022 Brochure & Specs preview
9022
Brand: TallyGenicom Pages: 3
Oce CS230 Phase 3 User Manual preview
CS230 Phase 3
Brand: Oce Pages: 686
Konica Minolta bizhub C452 Series Replacement Instructions Manual preview
bizhub C452 Series
Brand: Konica Minolta Pages: 17
Xerox Document Centre 255 LP Reference Manual preview
Document Centre 255 LP
Brand: Xerox Pages: 158
TEC tecjet 6090DTG-dx5 User Manual preview
tecjet 6090DTG-dx5
Brand: TEC Pages: 73
LevelOne FPS-2013TXU User Manual preview
FPS-2013TXU
Brand: LevelOne Pages: 88
Olivetti PR4 SL User Manual preview
PR4 SL
Brand: Olivetti Pages: 8
Lexmark C6160 User Manual preview
C6160
Brand: Lexmark Pages: 142
Xerox 7400DN - Phaser Color LED Printer Accessory Manual preview
7400DN - Phaser Color LED Printer
Brand: Xerox Pages: 3
Sagem MF 6990dn User Manual preview
MF 6990dn
Brand: Sagem Pages: 154
Citizen CT-S251 User Manual preview
CT-S251
Brand: Citizen Pages: 255
Lexmark 4039 - B/W Laser Printer Parts List preview
4039 - B/W Laser Printer
Brand: Lexmark Pages: 49
Lexmark 5200 Series Setup preview
5200 Series
Brand: Lexmark Pages: 64
Lexmark 5400 Series Quick Manual preview
5400 Series
Brand: Lexmark Pages: 2
Epson EMP-30 User Manual preview
EMP-30
Brand: Epson Pages: 68
Epson EMP 7800 Specifications preview
EMP 7800
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands