Epson 1250 - Perfection Photo Flatbed Scanner, Service Manual

Page: 31 / 58

EPSON Perfection 1250/1250 PHOTO Disassembly and Assembly
31
4.2.2 Document Cover
1. Open the document cover.
2. Holding it by its edges, lift the document cover straight up to remove it.
Figure 4-3. Document Cover Removal
Figure 4-4. Document Cover Removal
4.2.3 Upper Cover Removal
Preparation:
"
Remove the document cover as described in the previous section.
"
Move the carriage lock to the locked position as described in Carriage
Lock Release on page 30.
1. Remove two screws (CBP, M3x8) from the rear of the scanner.
2. Disengage the six hooks at the left and right of the cover (use a flat-tipped
screwdriver or similar tool to work the cover upward), then lift the back of
the upper cover and push it forward to remove it.
Figure 4-5. Upper Cover Removal - Remove Rear Screws
Document Cover
C A U T I O N
"
When removing the upper cover, make sure that the
hooks are fully disengaged and that the tabs do not get
broken.
"
The edges of the metal shields are sharp, so be careful
during disassembly and reassembly.
CBP (M3x8) screws