Epson 1250 - Perfection Photo Flatbed Scanner, Service Manual

Page: 30 / 58

EPSON Perfection 1250/1250 PHOTO Disassembly and Assembly
30
4.1.2 Screws
See the tables below if you’ve forgotten where to put a particular screw.
Screws are referred to by number throughout the disassembly instructions.
4.2 Disassembly Procedures
This section describes the disassembly and removal procedures for each
major component of the scanner.
4.2.1 Carriage Lock Release
1. Disconnect the power cable from the scanner.
2. Make sure the carriage lock at the rear of the scanner is in the released
position.
Figure 4-2. Carriage Lock Position
Table 4-2. Screw Name Abbreviations
Abbreviation Screw Name
CBP P-type cross-head binding screw
CBB B-type cross-head binding screw
Table 4-3. List of Screw Types
No. Specification Shape
1 CBP(M3x8)
2 CBB(M2.5x12)
Locked Position Released Position
C A U T I O N
Before relocking the carriage to transport the scanner,
make sure that the carriage is in the home position.