Epson 11880 - Stylus Pro Color Inkjet Printer User Manual Download Page 36

Page: 36 / 182

Paper Handling

User’s Guide

Loading cut sheet media
longer than Super A3/B
(483 mm)

Turn on the printer by pressing the

button.

Press the

button repeatedly until Sheet

appears.

Make sure that the roll paper cover is
closed.

Make sure that the Paper Check light is on,
and then set the paper lever to the released
position.

LEVER RELEASED. LOAD PAPER

appears on the LCD panel.

The paper lever may be locked if

REMAINING

PPR SETUP

is set to

ON: AT ROLL EXCHANGE

In this case, press and hold the

button

for 3 seconds to print the barcode, so you
can release the paper lever.

Load the sheet into the paper insertion slot
until it comes out below.

Caution:

Do not set the paper lever to the released
position while the Power light or Pause
light is flashing; otherwise, damage may
occur.

Note:

Load the sheet vertically, like most magazines.

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer























































































































































































Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands

Epson 11880 - Stylus Pro Color Inkjet Printer, User Manual

Search results

Summary of Contents for 11880 - Stylus Pro Color Inkjet Printer

Reviews:

Related manuals for 11880 - Stylus Pro Color Inkjet Printer

Brands by name

Popular brands