Testing the Printer
The self test prints the current DIP-switch settings, followed
by font samples for
each
of the printer’s available fonts.
5. The self test continues until the paper runs out or until you
press the
PAUSE
button. When the printer beeps, you
can
load
another sheet of paper to continue printing font samples.
When you wish to stop the test, press
the PAUSE
button. To
resume the test, press the
PAUSE
button again.
6.
Press the
LOAD/EJECT
button to eject the paper.
Then turn off
the
printer to end the self test.
Here is part of a typical self test:
Roman
) * + , - . / 0 1 2 3 4 5 6 7 8 9 :
S e r i f
Note: If the self test does not print properly, see Chapter 6.
Setting Up the Printer
1-13
