CHAPTER 1: INTRODUCTION
S5U1C63002P MANUAL
EPSON
1
(PERIPHERAL CIRCUIT BOARD FOR S1C63158/63358)
CHAPTER
1 I
NTRODUCTION
1.1 Outline of S5U1C63002P
The S5U1C63002P provides on a board all the peripheral circuits of S1C63 Family microcomputers other
than the core CPU. By installing this board in the ICE (S5U1C63000H1) you can use it to emulate each
model in the S1C63 Family. For the models that can be supported by this board, refer to "Precautions on
Using the S5U1C63002P Peripheral Circuit Board" included in this package.
Note that this board can be set to your intended model by loading mask option data (generated by
"FOG63XXX" software tool) into the ICE using the debugger command.
1.2 Components of S5U1C63002P
After unpacking your S5U1C63002P package, check to see that all of the following components are included.
(1) S5U1C63002P main unit (S5U1C63002P board, S5U1C63003P board) ............... 1 pair
(2) I/O cable (80-pin+40-pin/40-pin
×
2 flat type) ....................................................... 1 pair
(3) Target system I/O connector (40-pin) ...................................................................... 2 pcs.
(4) S5U1C63002P Manual (Peripheral Circuit Board for S1C63158/63358) ............. 1 copy
(5) Warranty card ............................................................................................................... 1 card
(6) User registration card .................................................................................................. 1 card
(7) Precautions on Using the S5U1C63002P Peripheral Circuit Board ..................... 1 sheet
1.3 External View of S5U1C63002P
VLCD(V2V/V3V)
OSC3(CR)Adj
OSC1(CR)Adj
VSVD
VCCHG
VDC
OSCC
DBON
VDSEL
SVDS0
SVDS2
SVDON
LPWR
CLKCHG
HLON
SVDS1
SVDS3
RESET
GND
fOSC1(CR)
fOSC3(CR)
SEIKO EPSON CORP.
VADSEL
Fig. 1.3.1 External view of S5U1C63002P
PRC63003 REV.1
SEIKO EPSON CORP.
Fig. 1.3.2 External view of S5U1C63003P
∗
The name 'PRC63003' on the development tool is the old
name of the product.
