EPSOM – E7106C 12
For assembly advice or parts go to
STEP 3.
Turn the drawer upside-down as shown and attach the Drawer Slides (
DR
and
DL
) with the four
H6
Screws
as shown below. Each slide requires two screws.
H6 Screw
Note:
The top drawers of your cabinet are different. You will have a RH and LH drawer – if they sit
crooked and overlap try swapping them around.
STEP 4.
CONGRATULATIONS, YOUR
EPSOM 6 DRAWER CHEST
IS NOW COMPLETE.
TO ENSURE YOUR WARRANTY REGISTER @ www.warehousefurniture.co.nz
THANK-YOU FOR SUPPORTING NEW ZEALAND MADE FURNITURE
Attach the Drawer Handles to the Drawer
Front using the screws provided.
Fit the drawer into the cabinet. Make sure
that the rollers at the back of the drawer
go behind the front rollers in the cabinet
and into the channel of the drawer slide.
(It helps to lift the front of the drawer up
a little when doing this.)
