Job No ………….
E7106C – 6 DRAWER CHEST
Congratulations on your purchase of your
EPSOM 6 DRAWER CHEST
. The
EPSOM
Collection is made
in New Zealand from 100% New Zealand made MDF –an environmentally sound renewable resource.
If you require any parts or assembly advice or have any questions please go to
0800 100 858.
WHERE TO ASSEMBLE YOUR UNIT
Assemble your unit on a clean and smooth surface, free of anything which may damage the laminated
surface. A carpeted floor is ideal. If assembling on a workbench or table we suggest you cover it with the
carton the Chest was packaged in.
Warning
! Never leave hardware parts where children can reach them. Small parts may be a choking
hazard!
PARTS LIST
Please check you have all the parts before beginning to assembling your cabinet. The measurements
will help you identify each part. If any parts are missing or damaged please contact us directly for
replacements and advice. Do not call the store you bought the cabinet from as they will be unable to
help you.
Note: You will find two pieces of board fitted across the ends of the package. These are
for packing purposes only and are not part of the cabinet.
QTY PART
MEASUREMENTS
NOTES
1
Top
996 x 396 x 25mm
25mm thick. Blue mark on back edge.
1
LH End
1017 x 372 x 15mm Finished on both sides. Green mark on back
edge.
1
RH End
1017 x 372 x 15mm Finished on both sides. Red mark on back edge.
2
Small Drw Fronts
470 x 141 x 15mm
Black finish on one side
4
Large Drw Fronts
944 x 195 x 15mm
Black finish on one side
1
Division
139 x 354 x 15mm
Black finish on one edge.
1
Front Toeboard
950 x 80 x 15mm
Black finish on one side
3
Rails
950 x 80 x 15mm
Plain – two middle holes
2
LH Drw Side – Sml
340 x 115 x 12mm
Plain
4
LH Drw Side - Lrg
340 x 160 x 12mm
Plain
2
RH Drw Side – Sml
340 x 115 x 12mm
Plain
EPSOM
collection
