EPSOM – E7105T 5
For assembly advice or parts go to
STEP 2
– this step is the same as the previous but it is the Right Hand End
Lay the RH End on a smooth clean surface.
Take four RH cabinet drawer slides (CR) and screw them to the RH End using the H4 Drawer Slide
Screws.
H4
Insert two
H2 Cams
as
shown in diagram. Make
sure the arrow on the top of
the Cam points towards the
top edge of the End.
H2
Push two
H15 Dowels
into
the top edge of the End.
H15
Screw three
H1 Connecting
Bolts
into
the
holes
indicated on the opposite
diagram.
H1
STEP 3
Lay the Top laminate side down on a clean, clear surface.
Screw the H1 Connecting Bolts in the holes as indicated in the drawing below.
