SK202 User manual
PCs to complete the test. You c
Iperf3 test method:
Figure 6.
Refer to the figure 6 to con
need the same speed, such as G
192.168.10.2, IP address of PC
cable for testing
PC-A as a server, run comm
PC-B as client, run comma
192.168.10.2 --time 100
IPERF3 will test 100 secon
there will be BER and jitter res
At server side:
At client side:
If you care about the output o
change the SK202 modules to
the same command for compar
4
of
6
can download from the address as below:
wnload.php
Iperf3 test Schematic diagram with SK202
onnect to the network. The network adapters of
Gigabit Ethernet controller. IP address of PC-A
PC-B is set to 192.168.10.3. Please use at least C
mand:
iperf3 --server
and:
iperf3 --udp --bandwidth 1G --c
--len 63k
nds through UDP protocol with 1G bandwidth
sult output as the blow picture.
put of iperf3 test, a comparison test is necessary
a RJ45 connector to directly connect two PCs
rison test.
f two PCs
A is set to
Cat5e-type
lient
h, and
y. You can
s, and use
