Attention!
End of day
report is printed
automatically at the set time. If you print
End of Day
report manually, all records about
current day payments will be deleted.
Respectively, in
Daily
report you will see only
those transactions, that were performed
after printing
End of Day
report.
Should you have any question please contact us.
EPS LT help desk service is available 24/7.
Please call us by phone
+370 5 207100
or
address by e-mail:
Thank you for using our services!
jo
CARD READER USER MANUAL
ADDITIONAL MENU
In order to tear off a printed receipt, grasp
the top of the receipt with your fingers and
gently pull the paper diagonally down from
the left side toward the reader’s
screen.
REPLACEMENT OF RECEIPT PAPER
Cancellation
–
possibility
to
cancel
performed payment transaction
(until the
close of day).
Refund
–
possibility to return funds to the
card while returning goods.
The list of performed payment transactions
is displayed in
Daily report .
Press
F3
button, choose
„
Daily report
“
and
press
green
button.
DAILY REPORT
Daily report
–
possibility to print the list of
payment transactions.
Last receipt
- possibility to print the receipt of
last payment transaction.
Unclosed documents
–
possibility to review
the list of unfinished transactions, in order to
confirm, cancel or remove them.
End of day
–
close the day (manually) and
print end of day report.
Switching on
F2 menu functions
(only with the consent
of the bank)
F3 menu
Plug the card reader power cord. Press
green
button and wait until card reader displays the
message:
“
Welcome
”
.
If card reader has activated operator
password function* the message
„
Terminal is
locked
“ appears on the screen. Please enter
the password and press the
green
button.
After entering the correct password the
message
„
Welcome
“
is displayed on the
screen.
Card reader reboot
If card reader is not working properly or loses
the connection, please reset the device. For
mobile (IWL) card readers, press the
yellow
and
DOT
buttons at the same time
.
To reboot ICT type card reader, unplug the
power cord and switch on the device again.
*
The function can be activated and operator
password provided upon written request.
Special thermal paper rolls (widht 57 mm,
diameter < 38 mm) should used for card
readers. Colored warning strip indicates that
paper roll comes to an end.
