11
Please follow the below steps to charge the Remote Control by wired
connection.
First, connect the Remote Control to the outboard motor by a communication
cable first (Figure 3-3);
Then, connect the outboard motor to the battery.
Communication Cable
Figure 3-3
During long-term storage, ensure to charge the Remote Control battery
every 6 months to avoid over-discharge.
After long-term storage, charge the Remote Control before use.
The communication cable is not included in this package. Please
purchase one from your dealer if you choose this charging method.
It’s recommended to switch off the Remote Control while connecting
the communication cable. When the Remote Control is switched on
while charging, as the outboard main part and Remote Control are
in communication, the working outboard motor will stop once the
communication cable disconnects.
* The communication cable needs
to be purchased separately.