ePropulsion NAVY 3.0 Evo User Manual Download Page 3 | Manualshive

Page: 3 / 60

background image

1

Acknowledgement

Thanks for choosing ePropulsion products, your trust and support in our company
are sincerely appreciated. We are dedicated to providing high-performance electric
outboards, electric outboards, sup/kayak motors, reliable lithium batteries and acces-
sories.
Welcome to visit www.epropulsion.com and contact us if you have any concerns.

Using This Manual

Before use of the product, please read this user manual thoroughly to understand the
correct and safe operations. By using this product, you hereby agree that you have
fully read and understood all contents of this manual. ePropulsion accepts no liability
for any damage or injury caused by operations that contradict this manual.

Due to ongoing optimization of our products, ePropulsion reserves the rights of con-
stantly adjusting the contents described in the manual. ePropulsion also reserves the
intellectual property rights and industrial property rights including copyrights, patents,
logos and designs, etc.

This manual is subject to update without prior notice, please visit our website www.
epropulsion.com for the latest version. If you find any discrepancy between your
products and this manual, or should you have any doubts concerning the product or
the manual, please visit www.epropulsion.com.

ePropulsion reserves the rights of final interpretation of this manual.

This manual is multilingual, in case of any discrepancy in the interpretation of differ-
ent language versions, the English version shall prevail.

Symbols

The following symbols will help to acquire some key information.

Important instructions or warnings

Useful information or tips

«
1
2
3
4
5
...
»

Summary of Contents for NAVY 3.0 Evo





























































Reviews:

No comments

Related manuals for NAVY 3.0 Evo

phyCORE-ADuC812

Brand: Phytec Pages: 86

Brand: FAAC Pages: 8

Brand: Texas Instruments Pages: 38

Brand: Xilinx Pages: 56

IONITX-N series

Brand: Zotac Pages: 50

Brand: Gigabyte Pages: 40

Brand: Aaeon Pages: 119

Brand: Supero Pages: 85

Brand: Albatron Pages: 57

Brand: Gigabyte Pages: 96

Brand: Supermicro Pages: 84

GA-B150M-D3V DDR3

Brand: Gigabyte Pages: 4

dsPICDEM MCHV-3

Brand: Microchip Technology Pages: 68

Brand: Gigabyte Pages: 96

Brand: Aaeon Pages: 74

Brand: AZZA Pages: 61

Brand: Gigabyte Pages: 80

Brand: DFI Pages: 101

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands