Stand 26.11.08, SB 55 SV, Drills
Page 14 of 37
1.8 Personal protective equipment for special work
Use for your work always the necessary personal protective.
Protect your face and your ears: Wear a safety helmet with a face guard for
every work, especially for any kind of work where your face and eyes are
exposed to hazards.
Use protective gloves when lifting or handling pieces with sharp edges.
CAUTION!
Do not wear protective gloves, if you have to hold work parts with the hands.
Hooking work parts can cause heaviest injuries that can lead to constrictions and/
or breaks.
Wear safety shoes when fitting, dismanteling or transporting heavy components.
Use ear protection over 80dB
Wear closely safety suit.
Do not wear long hair open, wear hairnet or cap
Check before start of work whether the required protective is complete and intact.
Broken protective has to be modernized. Always announce missing protective
and only begin to work if the protective is complete.
Caution!
Contaminated, defiled protectives can release indispositions. Clear them up after
every use and at least once a week.
Summary of Contents for SB 55 SV
Page 30: ...Stand 26 11 08 SB 55 SV Drills Page 30 of 37 7 Exploded drawing 7 1 Exploded drawing actuator ...
Page 32: ...Stand 26 11 08 SB 55 SV Drills Page 32 of 37 9 Exploded drawing 9 1 Exploded drawing stand ...
Page 34: ...Stand 26 11 08 SB 55 SV Drills Page 34 of 37 11 Circuit diagram 11 1 Circuit diagram SB 55 SV ...
