3-10 CHAPTER 3
PM Events:
AWARD BIOS defines 15 PM Events in the power management mode (Doze,
standby & suspend). The user can initialize any PM Events to be "Enable" or "Disable".
When the system detects all of the enabled events, do not have any activity. It will
start the system Doze timer first if the "Power Management" is not "Disabled". Once
the system Doze timer is timed out, it will process doze power saving procedure
by starting the system standby timer. When the standby timer run out and all of the
"Enabled" events remains silent, the system will enter the standby mode. By now, the
system will not only process the standby power saving procedures but also start the
system suspend timer. When the suspend timer times out, all of the CPU clock will
stop by dropping system clock down to zero and remains this way until any one
of the "Enabled" event occurrs.
3-5
PnP/PCI CONFIGURATION
The PnP/PCI configuration program is for the user to modify the PCI/ISA IRQ signals
when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING
: Conflicting IRQs may cause the system to not find cutain devices
ROM PCI/ISA BIOS(2A59CPAC)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
Resources Controlled By
: Manual
PCI IRQ Actived By
: Level
Reset Configuration Data
: Disabled
PCI IDE IRQ Map To
: PCI-AUTO
Primary IDE INT#
: A
IRQ-3
assigned to
: Legacy ISA
Secondary IDE INT#
: B
IRQ-4
assigned to
: Legacy ISA
IRQ-5
assigned to
: PCI/ISA PnP
Used MEM base addr
: N/A
IRQ-7
assigned to
:PCI/ISA PnP
IRQ-9
assigned to
: PCI/ISA PnP
IRQ-10
assigned to
: PCI/ISA PnP
IRQ-11
assigned to
: PCI/ISA PnP
IRQ-12
assigned to
: PCI/ISA PnP
IRQ-14
assigned to
: PCI/ISA PnP
IRQ-15
assigned to
: PCI/ISA PnP
DMA-0
assigned to
: PCI/ISA PnP
DMA-1
assigned to
: PCI/ISA PnP
DMA-3
assigned to
: PCI/ISA PnP
DMA-5
assigned to
: PCI/ISA PnP
DMA-6
assigned to
: PCI/ISA PnP
DMA-7
assigned to
: PCI/ISA PnP
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : No Change (Shift) F2 : Color
F7 : Load Setup Defaults
Figure 3-6 PCI CONFIGURATION SETUP
Resource Controlled By:
The default value is Manual.
Manual:
The PNP Card's resource will be controlled manually. You can set which
IRQ-X and DMA-X are assigned to PCI/ISA PNP or Legacy ISA Cards.
Auto:
If your ISA card and PCI card are all PNP cards, BIOS will assign the inter
rupt resource automatically.
