Installation
LXR
Page 9
Power On/Off - This is connected to the power button on the case.
Using the Soft-Off by Pwr-BTTN feature, you can choose either
Instant Off (turns system off
immediately
), or 4 sec delay (you need to
hold the button down for 4 seconds before the system turns off). When
the system is in 4 sec delay mode,
2theMax
has added a special feature to
make the system go into suspend mode when the button is pressed
momentarily.
J 2
Device Connectors
(continued)
Speaker - Connect to the system's speaker for beeping
1. Speaker 3. GND
2. N/C
4. GND
Reset - Closed to restart system.
Turbo LED indicator - LED ON when higher speed is selected
IR Connector
1. VCC
4. GND
2. NC
5. IRTX
3. IRRX
IDE LED indicator - LED ON when Onboard PCI IDE Hard disks is
activate
KeyLock - Keyboard lock switch & Power LED connector
1. Power LED(+) 4. Keylock
2. N/C
5. GND
3. GND
J 3
1
+
+
1
1
