EP-USB66
Page 10
Software Installation
Windows 95/98 UltraDMA-66 Driver Installation
Systems With Windows 95/98 Already Installed
Usually, when you plug the EP-USB66 card adapter into your system and boot up the
Windows 95/98 system, the system will be able to detect the “HPT366 Ultra DMA
host Adapter” automatically and ask you to install the driver for HPT366. You can
follow the instructions prompted by the system to install the driver.
Otherwise, you can install the driver by the following steps:
1.
Windows 95/98 must be installed on the system prior to installing the driver.
2.
Close any running applications.
3.
Open "My Computer".
4.
Double click on the "Control Panel" icon.
5.
Double click on the "Add New Hardware" applet.
6.
Click on the "Next" button.
7.
There is a window that ask you "Do you want Windows to search for your new
hardware?", choose "No" then click on the "Next" button.
8.
There is a Window listing hardware types, select the "SCSI controllers" then
click on the "Next" button.
9.
Put the install diskette into the drive A: and then click on the "Have Disk..."
button.
10. Click on the "OK" button.
11. Click on the "Next" button.
12. If there is a window showing the settings (resources) to be used by the driver,
then click on the "Next" again. At this point, the system will install the driver.
13. Click on the "Finish" button.
14. Then the system will ask you to restart the system. If the settings reported in step
12 are not what set on the host adapter, you must adjust the settings by using the
device manager in the System control panel before restarting your computer.
