BIOS
EP-MVP4G
Page 4-13
Delay 4 Second : Turns off after a 4 second delay. If momentary press of
button, the system will go into Suspend Mode. Press again to take system
out of Suspend Mode.
PWRON After PW-Fail: The system will stay of or power on after a power
interrupte.
The default is Fomer-Status.
Fomer-Status: Stay off or power on depend on system safe shut-down or power
fail.
ON: System always power on after a power interrupte.
OFF: System always stay off after a power interrupte.
VGA: When set to On (default), any event occurring at a VGA port will awaken a
system which has been powered down.
LPT & COM: When set to On (default), any event occurring at a COM(serial)/
LPT (printer) port will awaken a system which has been powered down.
HDD & FDD: When set to On (default), any event occurring at a hard or floppy
drive port will awaken a system which has been powered down.
DMA/master: When set to On (default), any event occurring to the DMA controller
will awaken a system which has been powered down.
RTA Alarm Resume: When set to Enable rta alarm resume, you could set the
date (of month) and timer (hh:mm:ss), any event occurring at will awaken a system
which has been powered down.
Modem Ring Resume: When set to Enabled, any event occurring to the Modem
Ring will awaken a system which has been powered down.
Primary INTR: When set to On (default), any event occurring at will awaken a
system which has been powered down.