EPOX EP-8kem, User Manual

Page: 48 / 87

BIOS
Page 4-21
Reset Configuration Data : This setting allows you to clear ESCD data.
The default is Disabled
Disabled : Normal Setting.
Enabled : If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can
set this field to Enabled in order to clear ESCD.
PCI/VGA Palette Snoop: Leave this field at Disabled.
The choice: Enabled, Disabled.
Assign IRQ For VGA/USB : This item allows BIOS to assign whether IRQ is
with VGA/USB or not. If you have not connect the VGA/USB device. Can
release the IRQ for other device. The default is Enabled.
Enabled : Provides IRQ for VGA/USB device.
Disabled : Release IRQ for other device.
PCI Latency Timer (CLK) : The latency timer defines the minimum amount of
time, in PCI clock cycles, that the bus master can retain the ownership of the bus.
The Choice: 0-255.
INT Pin 1 to Pin 4 Assignment : These settings allow the user to specify what
IRQ will be assigned to PCI devices in the chosen slot. Options available: Auto,3,
4,5,7,9,10,11,12,14 & 15. The defaults are Auto.