EPOX EP-61BXC-A, User Manual

Page: 48 / 76

BIOS EP-61BXC-A
Page 4-18
The default is Enabled.
Enalbed: Provides IRQ for USB device.
Disabled: Release IRQ for other device.
4-6 Load Setup Defaults
The “LOAD SETUP DEFAULTS” function loads the system default data directly
from ROM and initializes the associated hardware properly. This function will be
necessary only when the system CMOS data is corrupted.
4-7 Integrated Peripherals
Figure 8: Integrated Peripherals
Note: If you do not use the Onboard IDE connector, then you will need to
set Onboard Primary PCI IDE: Disabled and Onboard Secondary PCI
IDE: Disabled
Note: The Onboard PCI IDE cable should be equal to or less than 18
inches (45 cm.).
IDE HDD Block Mode: IDE Block Mode allows the controller to access blocks
of sectors rather than a single sector at a time.
The default is Enabled.
ROM PCI/ISA BIOS(2A69KPA9)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode : Enabled Onboard Serial Port 2 : Auto
IDE Primary Master PIO : Auto Onboard IR Controller : Disabled
IDE Primary Slave PIO : Auto Onboard Parallel Port : 378/IRQ7
IDE Secondary Master PIO : Auto Onboard Parallel Mode : ECP / EPP
IDE Secondary Slave PIO : Auto ECP Mode Ise DMA : 3
IDE Primary Master UDMA : Auto Parallel Port EPP Type : EPP1.9
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
Onboard Primary PCI IDE : Enabled
Onboard Secondary PCI IDE : Enabled
USB Keyboard Support : Disabled
POWER ON Method : Hot Key
KB Power ON Password : Enter
Hot Key Power ON : Ctrl-F1
KBC Input Clock : 12MHz
Onboard FDD Controller : Enabled
Onboard Serial Port 1 : Auto
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
é é é é é ê
ê
ê ê
ê è è
è è
è ç ç
ç ç
ç