BIOS
EP-3VCA2
Page 4-18
Soft-Off by PWRBTN
: Use this to select your soft-off function.
The default is Instant Off.
Instant Off
: Turns off the system instantly.
Delay 4 Second
: Turns off the system after a 4 second delay. If momentary
press of button, the system will go into Suspend Mode. Press
the power botton again to take system out of Suspend Mode.
State After Power Failure
: This field lets you determine the state that your PC
returns to after a power failure. If set to Off, the PC will not boot after a power
failure, if set to On, the PC will restart after a power failure.
CPU FAN In Suspend
: This option is used to set if the CPU fans will turn off
during suspend mode. The default is Off.
On
: The system will turn off the CPU fans during suspend mode.
Off
: The system will not turn off the CPU fan during suspend mode.
VGA:
When set to On (default), any event occurring at a VGA port will awaken a
system which has been powered down.
LPT & COM:
When set to
On
(default), any event occurring at a COM(serial)/
LPT (printer) port will awaken a system which has been powered down.
HDD & FDD
: When set to
On
(default), any event occurring at a hard or floppy
drive port will awaken a system which has been powered down.
PCI Card
: When set to
On
(default), any event occurring to the DMA controller
will awaken a system which has been powered down.
Modem Ring Resume
: When set to
Enabled
, any event occurring to the Modem
Ring will awaken a system which has been powered down.
RTC Alarm Resume
: When set to
Enable rtc alarm resume,
you could set the
date (of month) and timer (hh:mm:ss), any event occurring at will awaken a
system which has been powered down.
Primary INTR
: When set to
On
(default), any event occurring at will awaken a
system which has been powered down.