manualshive.com logo in svg

EPOX EP-3VBM+, Manual, Page: 9 / 71

Share
Download
EPOX EP-3VBM+ Manual Download Page 9

Introduction

EP-3VBM+

Page 1-3

ATX
POWER SUPPLY

Power-On/Off (Remote)

The EP-3VBM+ has a single 20-pin connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be connected
to the systems front panel for system Power On/Off button. The systems power
On/Off button should be a momentary button that is normally open.

The EP-3VBM+ has been designed with “Soft Off" functions. You can turn Off
the system from one of two sources: The first is the  front panel Power On/Off
button, and the other is the "Soft Off" function (coming from the EP-3VBM+’s
onboard circuit controller) that can be controlled by the operating system.  Win-
dows 95/98 will control this when the user clicks that they are ready to Shutdown
the system.

Figure 3: Simple ATX Power ON/OFF Controller

Case (chassis) Power

ON/OFF button (J 3)

J 3

I/O Shield Connector

The EP-3VBM+ is equipped with an I/O back panel.  Please use the appropriate
I/O shield (figure 2).

PS/2 Mouse

PS/2

KEYBOARD

USB port

COM1

COM2

parallel port

Speaker

Line_in

MIC

Figure 2: I/O back panel layout

Joystick/Midi port

Summary of Contents for EP-3VBM+








































































Reviews:

No comments