EPOX An Intel Socket 478 Processor Based Mainboard (400/533MHz), User Manual

Page: 50 / 96

BIOS
Page 4-14
Midi Port Address
Select an address for the Midi port.
Options: 290, 300, 330, Disabled (default).
Midi Port IRQ
Select an interrupt for the Midi port.
Options: 5, 10 (default).
Onboard LAN Device (Optional)
Enables the onboard LAN feature.
Options: Enabled, Disabled.
Onboard I/O Chip Setup
Scroll to Onboard I/O Chip Setup and press <Enter>. The following screen appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install add-in FDC or the system has
no floppy drive, select Disabled in this field.
Options: Enabled, Disabled.
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and second serial ports.
Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
UART Mode Select
This filed allows the users to configure what IR mode the 2nd serial port should
use. The default is Normal.
Options: Normal, IrDA and ASKIR.