EPOX AMD Socket et A Processor based AGP (8X) mainboard, User Manual

Page: 78 / 90

Appendix
C-2
Disk To Disk (Disk Cloning)
1. Select the location of the Source drive .
2. Select the location of the Destination drive .
3. When cloning a disk or restoring the backup, set the required partition size as
shown in the following figure.
There are 3 hard disk functions:
1. Disk To Disk (disk cloning)
2. Disk To Image (disk backup)
3. Disk From Image (restore backup)
Important!
1. To use this function, the system must have at least 2 disks. Press the Tab key to
move the cursor.
2. When restoring to a destination disk, all data in that disk will be completely
destroyed .
4. Click OK to display the following confirmation screen. Select Yes to start.