QUICK CONNECTIONS
Switch off your amplifier whenever making connections.
Take your speaker cable and connect the positive terminal on the amplifier left channel,
or coloured red, to the positive terminal on the left loudspeaker. The negative
terminal on the amplifier left channel, marked - or coloured black, must be connected to
the negative terminal on the left loudspeaker. Repeat connections for the right channel.
If you choose to bi-wire your loudspeakers, please read the detailed section on page 4.
Switch on the amplifier with the volume turned down low. Check that the bass and treble
sounds come from both speakers. If not, switch off and remake the connections.
STANDS
For loudspeakers designed for use on stands, best results will be obtained if the stands are
rigidly coupled to the floor using carpet piercing spikes. Floor-standing loudspeakers
should also be coupled to the floor using the carpet piercing spikes supplied. This will help
preserve the outstanding mid-band clarity which is a hallmark of Epos loudspeakers. Epos
has designed its own stands.
The floor-standing models are supplied with their own support plinth. Contact your dealer
for further information or visit the Epos website www.epos-acoustics.com
SPIKES
Four threaded spikes are provided with each floor-standing speaker, together with
individual locking nuts. These should be screwed into the metal inserts in the bottom of
the plinth. Once these are adjusted to correct the level of the speaker and stop it from
rocking, tighten the locking nuts, so as to prevent the spikes from coming loose.
Adjusting the front spikes higher will tip the speaker up and can give sonic benefits.
CONNECTION
Ensure that your amplifier is switched off before you make, or break, any connections,
because damage may occur to your amplifier if shorted.
Your Epos loudspeakers are equipped with insulated gold-plated binding posts with
excellent electrical contact and current specification. The posts are connected to the
individual drivers as denoted on the rear panel label. Removable metal links enable the
loudspeaker to be conventionally wired with a single cable, bi-wired or bi-amped. These
techniques often bring benefits in terms of increased clarity and definition. If you are in any
doubt consult your dealer or visit www.epos-acoustics.com
E&OE
Page Three
